This side view camera plugs into the standard 4 pin aviation port found on most fleet mobile DVR systems, and the locking collar keeps the channel engaged through the vibration of long-haul routes and rough site roads. Two AHD resolution variants are offered, so each recorder channel can be matched to its own specification without mixing connector types in the parts store. The side-facing optics cover the lateral strip beside the cab and rear axle, where mirrors cannot verify whether a cyclist or scooter has moved alongside the vehicle. Sealed construction handles depot wash-down, rain and dust, and night view support keeps the image usable during evening and overnight shifts on urban bus routes and trunk haulage.
| Product Type | 4 Pin Side View Camera for Mobile DVR System |
|---|---|
| Camera Resolution | 720P / 1080P AHD Optional |
| View Angle | 120° Side Wide Angle |
| Night Vision | IR Infrared Night View |
| Waterproof Rating | IP69K |
| Voltage | DC 12V – 24V |
| Lens | Glass Wide-angle Lens |
| Screen Size | Display on mobile DVR monitor |
| Wired or Wireless | Wired, 4 Pin Aviation Connector |
| Working Temperature | -20°C ~ +70°C |
| Vehicle Compatibility | Truck, Bus, Coach, Van, Commercial Fleet Vehicle |
Mounted at the cab side or rear axle, the camera covers the lateral strip where a mirror check stops short of the door and where cyclists, scooters and adjacent vehicles typically hide. Sharing the same mobile DVR as front and rear channels, it completes a perimeter view, so the driver verifies lateral clearance before merging, cornering or drawing alongside a loading platform.
Infrared emitters activate as daylight fades, and exposure is tuned so lamp glare does not wash the frame out. On evening bus routes, unlit depots and overnight long-haul legs, riders, barriers and neighbouring vehicles remain identifiable, which keeps lane changes and docking manoeuvres on night shifts grounded in what the camera actually shows.
IP69K sealing lets the camera take high-pressure hot water cleaning as well as rain and mud splash from site roads. Depot wash-down schedules, cement dust and construction traffic do not disturb the sealed body, so permanent exterior mounting on the cab side or coach body survives routine fleet service without protective covers.
The 4 pin aviation connector locks the channel in place so vibration does not cause intermittent signal, and compatible recorders can bring the side channel up when the turn signal is engaged. Both resolution variants use the same connector and bracket layout, so a fleet can upgrade a channel without rewiring, and the locking collar speeds replacement during maintenance.
Dual 12V and 24V support means the same camera serves trucks, coaches, vans and other commercial vehicles running mobile DVR setups. Because the aviation connector is the standard interface on most fleet recorders, spare-part planning stays simple across mixed fleets, and the sealed housing and vibration-tolerant bracket suit trunk haulage, urban bus work and depot operations alike.