This 4 pin side view camera is engineered for truck and bus fleets that rely on mobile DVR systems for route recording. The aviation connector locks firmly into the DVR harness, so the signal stays stable through vibration on long-distance routes and rough road surfaces. Both 720P and 1080P AHD versions are available, letting operators match the camera to the recorder channel specification. A side-facing lens covers the lateral blind zone that mirrors cannot reach, helping drivers check for cyclists, scooters and adjacent vehicles before changing lanes or swinging into a loading bay. Waterproof construction and night view support keep the image usable through rain and after dark.
| Category | Parameter |
|---|---|
| Product Type | 4 Pin AHD Side View Camera for Mobile DVR System |
| Camera Resolution | 720P / 1080P AHD Optional |
| View Angle | 120° Side Wide Angle |
| Night Vision | IR Infrared Night View |
| Waterproof Rating | IP69K |
| Voltage | DC 12V – 24V |
| Lens | Glass Wide-angle Lens |
| Screen Size | Display on mobile DVR monitor |
| Wired or Wireless | Wired, 4 Pin Aviation Connector |
| Working Temperature | -20°C ~ +70°C |
| Vehicle Compatibility | Truck, Bus, Coach, Van, Commercial Fleet Vehicle |
The side-facing lens targets the lateral blind zone beside the door and rear axle, which mirrors cannot cover on long trucks and buses. When combined with front and rear channels on the same mobile DVR, the camera completes a multi-angle perimeter view, so the driver confirms lateral clearance before merging, turning at junctions or pulling alongside a loading platform.
Infrared LEDs switch on as ambient light drops, keeping the side scene readable on unlit routes, in dim depots and during night shifts. Cyclists, scooter riders and adjacent vehicles stay identifiable beside the vehicle, so night lane changes and docking manoeuvres rest on visible evidence rather than assumptions.
The camera carries IP69K protection, tolerating high-pressure hot water cleaning in addition to rain and mud splash. It keeps producing stable video through depot wash-down routines and dusty construction routes, so exterior mounting on the cab side or bus body holds up over the long term without protective covers.
The 4 pin aviation connector locks positively into the DVR harness, so the channel does not drop out under vibration, and the camera can be triggered to display when the turn signal is engaged on compatible systems. Both 720P and 1080P variants are offered, so operators can match each channel to the recorder's specification without mixing connector types.
With 12V and 24V support, the camera suits trucks, buses, coaches, vans and other commercial vehicles running mobile DVR setups. The aviation connector is the standard interface on most fleet recorders, which simplifies stock planning and replacement. Its sealed housing and vibration-tolerant mounting suit long-distance haulage, urban bus routes and depot operations alike.
